Spectacle Blinds
International Pipeline Structural Solutions Stock a wide range of Spectacle Blinds from quality approved European material that conform to industry standards, dimensions and client specific designs. A Spectacle Blind is a safety device used to isolate a section of line or piece of equipment when the line or equipment needs to be inspected or removed from service. It is different than a valve in that the blind is a permanent or long term isolation device.
| Specifications | |
|---|---|
| Available Sizes | ½” ( DN15 ) through to 72 ” ( DN1800 ) |
| Dimensions & Pressure Rating | All fittings are designed in accordance with ASME B16.48 unless otherwise specified. Typical Asme B16.48 ratings from 150lb through to 2500lb We also supply many other clients including Total, Shell, Maersk, Tengizchevroil. All these clients requirements vary dimensionally. We design and manufacture bespoke fittings. |
| Available Facing | Raised Face, Flat faced, Female Ring Type Joint, Male Ring Type Joint & Special items according to customer drawings. |
| Materials | |
|---|---|
| Stainless | A240-316/316L, A240-304/304L, A240-321, A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L |
| Carbon | A516-60/65/70 + 70 HIC Resistant, A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6 |
| Alloy Steel | A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52, F60, F65, F70 |
| Duplex & Super Duplex | A182 F51, F44, UNS S32760 |
| Nickel Alloys | 200, 400, 600, 625, 800, 825 |
| Unusual Grades | Bronze, Brass, Copper, Cupro Nickel, Titanium |
Blind Spades & Spacers
Spades and Ring Spacers are basically the same as Spectacle Blinds, except that both are not attached to each other. Spades and Spacers can be applied in systems where maintenance is often not necessary, or in applications with large pipe sizes. To prevent unnecessary weight to a flange connections, Spade & Spacers may be preferred over the larger and much heavier spec blind, maintenance on a pipe system can be a reason to temporarily replace a Ring Spacer for a Spade.
| Materials | |
|---|---|
| Stainless | A240-316/316L, A240-304/304L, A240-321, A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L |
| Carbon | A516-60/65/70 + 70 HIC Resistant, A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6 |
| Alloy Steel | A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52, F60, F65, F70 |
| Duplex & Super Duplex | A182 F51, F44, UNS S32760 |
| Nickel Alloys | 200, 400, 600, 625, 800, 825 |
| Unusual Grades | Bronze, Brass, Copper, Cupro Nickel, Titanium |
| Specifications | |
|---|---|
| Available Sizes | ½” ( DN15 ) through to 72 ” ( DN1800 ) |
| Dimensions & Pressure Rating | All fittings are designed in accordance with ASME B16.48 unless otherwise specified. Typical Asme B16.48 ratings from 150lb through to 2500lb We also supply many other clients including Total, Shell, Maersk, Tengizchevroil. All these clients requirements vary dimensionally. We design and manufacture bespoke fittings. |
| Available Facing | Raised Face, Flat faced, Female Ring Type Joint, Male Ring Type Joint & Special items according to customer drawings. |
